I intentionally broke the locking caps lock key.

Swap CAPS and Control for a semblance of sanity.

FossilOrigin-Name: 63dd287b7b6a0bc1073dff3f1dfa6cea8cb0378788867b03b27515838a2433c0

keyboards/converter/adb_usb/README.md

@@ -0,0 +1,16 @@
+
+# Recovering from Brick
+
+Short RST and GND twice for 8 seconds of serial.
+
+Quick, run:
+
+    avrdude -p atmega32u4 -P /dev/ttyACM0 -c avr109 -U flash:w:Caterina-Leonardo.hex
+
+It's an Arduino again.
+
+
+## Flash with QMK
+
+qmk flash -kb converter/adb_usb/rev1 -km mahlon
+

keyboards/converter/adb_usb/keymaps/mahlon/keymap.c

@@ -0,0 +1,24 @@
+
+#include QMK_KEYBOARD_H
+#if __has_include("keymap.h")
+#    include "keymap.h"
+#endif
+
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [0] = LAYOUT_m0116_ansi(LT(1, QK_SECURE_TOGGLE),
+        KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_NUM, KC_PEQL, KC_PSLS, KC_PAST,
+        KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_P7, KC_P8, KC_P9, KC_PPLS,
+        KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_P4, KC_P5, KC_P6, KC_PMNS,
+        KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_P1, KC_P2, KC_P3,
+        KC_LCTL, KC_LALT, KC_LGUI, KC_GRV, KC_SPC, KC_BSLS, KC_LEFT, KC_RGHT, KC_DOWN, KC_UP, KC_P0, KC_PDOT, KC_PENT),
+    [1] = LAYOUT_m0116_ansi(KC_NO,
+        KC_NO, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NO, KC_PSCR, KC_SCRL, KC_PAUS, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_INS, KC_HOME, KC_PGUP, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_DEL, KC_END, KC_PGDN, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_MUTE, KC_VOLD, KC_VOLU, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO)
+};
+
+#if defined(ENCODER_ENABLE) && defined(ENCODER_MAP_ENABLE)
+const uint16_t PROGMEM encoder_map[][NUM_ENCODERS][NUM_DIRECTIONS] = {
+
+};
+#endif // defined(ENCODER_ENABLE) && defined(ENCODER_MAP_ENABLE)
+

keyboards/converter/adb_usb/keymaps/mahlon/rules.mk

@@ -0,0 +1,20 @@
+CUSTOM_MATRIX = yes
+
+SRC += matrix.c adb.c led.c
+
+# OPT_DEFS += -DADB_MOUSE_ENABLE -DMOUSE_ENABLE
+
+DEFAULT_FOLDER = converter/adb_usb/rev1
+
+LTO_ENABLE = yes
+SECURE_ENABLE = yes
+VIA_ENABLE = no
+CONSOLE_ENABLE = no
+COMMAND_ENABLE = no
+MOUSEKEY_ENABLE = no
+EXTRAKEY_ENABLE = no
+SPACE_CADET_ENABLE = no
+GRAVE_ESC_ENABLE = no
+MAGIC_ENABLE = no
+MUSIC_ENABLE = no
+

keyboards/keyboardio/atreus/keyboard.json

@@ -0,0 +1,90 @@
+{
+    "keyboard_name": "Atreus",
+    "manufacturer": "Keyboardio",
+    "url": "",
+    "maintainer": "keyboardio",
+    "usb": {
+        "vid": "0x1209",
+        "pid": "0x2303",
+        "device_version": "0.0.1"
+    },
+    "features": {
+        "bootmagic": true,
+        "command": true,
+        "console": true,
+        "extrakey": true,
+        "mousekey": true,
+        "nkro": true,
+        "unicode": true
+    },
+    "qmk": {
+        "locking": {
+            "enabled": true,
+            "resync": true
+        }
+    },
+    "matrix_pins": {
+        "cols": ["F7", "E2", "C7", "C6", "B6", "B5", "D7", "D6", "D4", "D5", "D3", "D2"],
+        "rows": ["F6", "F5", "F4", "F1"]
+    },
+    "diode_direction": "COL2ROW",
+    "processor": "atmega32u4",
+    "bootloader": "caterina",
+    "layouts": {
+        "LAYOUT": {
+            "layout": [
+                {"matrix": [0, 0], "x": 0, "y": 0.6},
+                {"matrix": [0, 1], "x": 1, "y": 0.35},
+                {"matrix": [0, 2], "x": 2, "y": 0},
+                {"matrix": [0, 3], "x": 3, "y": 0.35},
+                {"matrix": [0, 4], "x": 4, "y": 0.7},
+
+                {"matrix": [0, 7], "x": 8, "y": 0.7},
+                {"matrix": [0, 8], "x": 9, "y": 0.35},
+                {"matrix": [0, 9], "x": 10, "y": 0},
+                {"matrix": [0, 10], "x": 11, "y": 0.35},
+                {"matrix": [0, 11], "x": 12, "y": 0.6},
+
+                {"matrix": [1, 0], "x": 0, "y": 1.6},
+                {"matrix": [1, 1], "x": 1, "y": 1.35},
+                {"matrix": [1, 2], "x": 2, "y": 1},
+                {"matrix": [1, 3], "x": 3, "y": 1.35},
+                {"matrix": [1, 4], "x": 4, "y": 1.7},
+
+                {"matrix": [1, 7], "x": 8, "y": 1.7},
+                {"matrix": [1, 8], "x": 9, "y": 1.35},
+                {"matrix": [1, 9], "x": 10, "y": 1},
+                {"matrix": [1, 10], "x": 11, "y": 1.35},
+                {"matrix": [1, 11], "x": 12, "y": 1.6},
+
+                {"matrix": [2, 0], "x": 0, "y": 2.6},
+                {"matrix": [2, 1], "x": 1, "y": 2.35},
+                {"matrix": [2, 2], "x": 2, "y": 2},
+                {"matrix": [2, 3], "x": 3, "y": 2.35},
+                {"matrix": [2, 4], "x": 4, "y": 2.7},
+                {"matrix": [2, 5], "x": 5, "y": 2.54},
+
+                {"matrix": [2, 6], "x": 7, "y": 2.54},
+                {"matrix": [2, 7], "x": 8, "y": 2.7},
+                {"matrix": [2, 8], "x": 9, "y": 2.35},
+                {"matrix": [2, 9], "x": 10, "y": 2},
+                {"matrix": [2, 10], "x": 11, "y": 2.35},
+                {"matrix": [2, 11], "x": 12, "y": 2.6},
+
+                {"matrix": [3, 0], "x": 0, "y": 3.6},
+                {"matrix": [3, 1], "x": 1, "y": 3.35},
+                {"matrix": [3, 2], "x": 2, "y": 3},
+                {"matrix": [3, 3], "x": 3, "y": 3.35},
+                {"matrix": [3, 4], "x": 4, "y": 3.7},
+                {"matrix": [3, 5], "x": 5, "y": 3.54},
+
+                {"matrix": [3, 6], "x": 7, "y": 3.54},
+                {"matrix": [3, 7], "x": 8, "y": 3.7},
+                {"matrix": [3, 8], "x": 9, "y": 3.35},
+                {"matrix": [3, 9], "x": 10, "y": 3},
+                {"matrix": [3, 10], "x": 11, "y": 3.35},
+                {"matrix": [3, 11], "x": 12, "y": 3.6}
+            ]
+        }
+    }
+}

keyboards/keyboardio/atreus/keymaps/mahlon/config.h

@@ -0,0 +1,6 @@
+
+#define TAPPING_TERM 175
+#define AUTO_SHIFT_REPEAT 1
+#define DOUBLE_TAP_SHIFT_TURNS_ON_CAPS_WORD 1
+
+

keyboards/keyboardio/atreus/keymaps/mahlon/keymap.c

@@ -0,0 +1,39 @@
+
+#include QMK_KEYBOARD_H
+
+enum {
+  TD_SPC_ENT,
+  TD_BS_DEL,
+};
+
+tap_dance_action_t tap_dance_actions[] = {
+  [TD_SPC_ENT] = ACTION_TAP_DANCE_DOUBLE(KC_SPC, KC_ENT),
+  [TD_BS_DEL]  = ACTION_TAP_DANCE_DOUBLE(KC_BSPC, KC_DEL),
+};
+
+enum layer_names {
+  _BASE,
+  _FN1,
+  _FN2,
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [_BASE] = LAYOUT(
+    KC_Q,    KC_W,   KC_E,    KC_R,    KC_T,                            KC_Y,    KC_U,     KC_I,    KC_O,    KC_P,
+    KC_A,    KC_S,   KC_D,    KC_F,    KC_G,                            KC_H,    KC_J,     KC_K,    KC_L,    KC_BSLS,
+    KC_Z,    KC_X,   KC_C,    KC_V,    KC_B,   KC_GRV,         KC_SCLN, KC_N,    KC_M,     KC_MINS, KC_QUOT, KC_SLSH,
+    KC_LCTL, KC_TAB, KC_LGUI, KC_LSFT, KC_ESC, TD(TD_BS_DEL),  KC_SPC,  KC_LALT, MO(_FN1), KC_COMM, KC_DOT,  KC_ENT ),
+
+  [_FN1] = LAYOUT(
+    KC_1,    KC_2,    KC_3,    KC_4,    KC_5,                   KC_6,    KC_7,     KC_8,    KC_9,     KC_0,
+    _______, _______, KC_INS,  KC_HOME, KC_PGUP,                KC_LEFT, KC_DOWN,  KC_UP,   KC_RIGHT, _______,
+    _______, _______, KC_DEL,  KC_END,  KC_PGDN, _______,       _______, _______,  _______, _______,  _______, _______,
+    _______, _______, _______, _______, _______, _______,       _______, TG(_FN2), _______, KC_LBRC,  KC_RBRC, KC_EQL ),
+
+  [_FN2] = LAYOUT(
+    KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,                   KC_F6,   KC_F7,   KC_F8,     KC_F9,   KC_F10,
+    KC_MUTE, KC_VOLD, KC_VOLU, _______, _______,                 _______, KC_BRID, KC_BRIU,   _______, KC_F11,
+    _______, _______, _______, _______, QK_BOOT, _______,        _______, _______, _______,   _______, _______, KC_F12,
+    _______, _______, _______, _______, _______, _______,        _______, _______, TO(_BASE), _______, _______, _______ )
+};
+

keyboards/keyboardio/atreus/keymaps/mahlon/rules.mk

@@ -0,0 +1,4 @@
+
+AUTO_SHIFT_ENABLE = yes
+TAP_DANCE_ENABLE  = yes
+CAPS_WORD_ENABLED = yes

keyboards/keychron/q4/ansi/keymaps/mahlon/config.h

@@ -0,0 +1,7 @@
+
+#define BOTH_SHIFTS_TURNS_ON_CAPS_WORD
+#define TRI_LAYER_LOWER_LAYER 2
+#define TRI_LAYER_UPPER_LAYER 3
+#define TRI_LAYER_ADJUST_LAYER 4
+
+

keyboards/keychron/q4/ansi/keymaps/mahlon/keymap.c

@@ -0,0 +1,103 @@
+
+#define TAPPING_TOGGLE 2
+
+#include QMK_KEYBOARD_H
+
+
+/*
+ * OVERRIDES
+ * https://docs.qmk.fm/features/key_overrides and
+ * https://docs.qmk.fm/feature_advanced_keycodes
+ */
+
+// Send the 'delete' keystroke with 'shift-backspace'
+const key_override_t delete_key_override = ko_make_basic(MOD_MASK_SHIFT, KC_BSPC, KC_DEL);
+
+const key_override_t *key_overrides[] = {
+    &delete_key_override
+};
+
+
+/*
+enum keycodes {
+  KC_CYCLE_LAYERS = QK_USER,
+};
+
+// 1st layer on the cycle
+#define LAYER_CYCLE_START 0
+// Last layer on the cycle
+#define LAYER_CYCLE_END   1
+
+// Add the behaviour of this new keycode
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case KC_CYCLE_LAYERS:
+      // Our logic will happen on presses, nothing is done on releases
+      if (!record->event.pressed) {
+        // We've already handled the keycode (doing nothing), let QMK know so no further code is run unnecessarily
+        return false;
+      }
+
+      uint8_t current_layer = get_highest_layer(layer_state);
+
+      // Check if we are within the range, if not quit
+      if (current_layer > LAYER_CYCLE_END || current_layer < LAYER_CYCLE_START) {
+        return false;
+      }
+
+      uint8_t next_layer = current_layer + 1;
+      if (next_layer > LAYER_CYCLE_END) {
+          next_layer = LAYER_CYCLE_START;
+      }
+      layer_move(next_layer);
+      return false;
+
+    // Process other keycodes normally
+    default:
+      return true;
+  }
+}
+*/
+
+
+// The keychron keyboards have a physical switch that sets the persistent
+// layer. When set to 'mac', it's 0.  When 'win', it's 1.
+//
+enum layers {
+    _DEFAULT = 0,  // MAC_BASE
+    _BASE,         // WIN_BASE switch
+    _FN1,
+    _FN2,
+    _FN3,
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [_BASE] = LAYOUT_ansi_61(
+        KC_ESC,  KC_1,     KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,     KC_MINS,  KC_EQL,   KC_BSPC,
+        KC_TAB,  KC_Q,     KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,     KC_LBRC,  KC_RBRC,  KC_BSLS,
+        KC_CAPS, KC_A,     KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN,  KC_QUOT,            KC_ENT,
+        KC_LSFT,           KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,   KC_SLSH,            KC_RSFT,
+        KC_LCTL, KC_LALT,  KC_LGUI,                            KC_SPC,                             KC_RALT,  TL_LOWR,  TL_UPPR,  KC_RCTL),
+
+    [_FN1] = LAYOUT_ansi_61(
+        KC_GRV,  KC_F1,    KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,   KC_F11,   KC_F12,   _______,
+        _______, KC_INS,  KC_HOME, KC_PGUP,  _______, _______, _______, _______, _______, _______, _______,  _______,  _______,  _______,
+        _______, KC_DEL,   KC_END, KC_PGDN,  _______, _______, KC_LEFT, KC_DOWN, KC_UP,  KC_RIGHT, _______,  _______,            _______,
+        _______,          KC_PSCR, KC_SCRL,  KC_PAUS, _______, _______, _______, KC_LEFT, KC_DOWN, KC_RIGHT, _______,            _______,
+        _______, _______,  _______,                            _______,                            _______,  _______,  _______,  _______),
+
+    [_FN2] = LAYOUT_ansi_61(
+        _______, KC_BRID,  KC_BRIU, KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_MPRV, KC_MPLY, KC_MNXT, KC_MUTE,  KC_VOLD,  KC_VOLU,  RGB_TOG,
+        _______, RGB_MOD,  RGB_VAI, RGB_HUI, RGB_SAI, RGB_SPI, _______, MS_BTN1, MS_BTN3, MS_BTN2, _______,  _______,  _______,  _______,
+        _______, RGB_RMOD, RGB_VAD, RGB_HUD, RGB_SAD, RGB_SPD, _______, MS_WHLD, MS_UP,   MS_WHLU, _______,  _______,            _______,
+        _______,           _______, _______, _______, MS_ACL0, MS_ACL1, MS_ACL2, MS_LEFT, MS_DOWN, MS_RGHT,  _______,            _______,
+        _______, _______,  _______,                            _______,                            QK_LOCK,  _______,  _______,  _______),
+
+    [_FN3] = LAYOUT_ansi_61(
+        KC_NUM,  KC_PSLS,  KC_PAST, KC_PMNS, KC_PPLS, _______, _______, _______, _______, _______, _______,  _______,  _______,  _______,
+        _______, KC_P7,    KC_P8,   KC_P9,   _______, _______, _______, _______, _______, _______, _______,  _______,  _______,  _______,
+        _______, KC_P4,    KC_P5,   KC_P6,   _______, _______, _______, _______, _______, _______, _______,  _______,            _______,
+        KC_P0,             KC_P1,   KC_P2,   KC_P3,   _______, _______, _______, _______, _______, _______,  _______,            _______,
+        _______, _______,  _______,                            _______,                            _______,  _______,  _______,  _______)
+};
+

keyboards/keychron/q4/ansi/keymaps/mahlon/rules.mk

@@ -0,0 +1,7 @@
+
+CAPS_WORD_ENABLE = yes
+COMMAND_ENABLE = no
+KEY_LOCK_ENABLE = yes
+KEY_OVERRIDE_ENABLE = yes
+TRI_LAYER_ENABLE = yes
+

qmk.json

@@ -0,0 +1,8 @@
+{
+    "userspace_version": "1.1",
+    "build_targets": [
+        ["keychron/q4/ansi/v2", "mahlon"],
+        ["converter/adb_usb/rev1", "mahlon"],
+        ["keyboardio/atreus", "mahlon"]
+    ]
+}